Conan Exiles Server Requirements: RAM and CPU for Enhanced
The Unreal Engine 5 update roughly doubled what a Conan Exiles server needs. How much RAM to plan for by group size, why one fast CPU core matters more than many, and which settings lower the load before you pay for a bigger plan.
Why old Conan Exiles server specs are now too low
Most requirement tables you will find still come from Funcom’s original technical manual, written for the Unreal Engine 4 server. It asked for very little: 8GB of RAM for 10 or 30 players and 12GB for 40, on desktop processors that were already old at the time.
| Funcom’s original table (UE4 server) | Small | Medium | Large |
|---|---|---|---|
| Players | 10 | 30 | 40 |
| CPU | Intel Core2Duo 6850, 3.0 GHz | Intel Core i5 2400, 3.1/3.4 GHz | Intel Core i7 6700, 3.4/4.0 GHz |
| RAM | 8GB | 8GB | 12GB |
| Disk space | 35GB | 35GB | 35GB |
Enhanced replaced that engine with Unreal Engine 5, merged the Exiled Lands and the Isle of Siptah into one map, and changed the memory picture completely. Funcom has not published a new server table, but server owners reported the jump on Funcom’s own forums within days of launch. One owner whose server had run about five players in 5 to 6GB, peaking near 7GB, found the same 8GB server being killed for running out of memory after the update, and needed about 9GB or more to keep it up. Another saw more than 10GB in use with only one player on a test server, and over 20GB with 32 players online.
Unreal Engine servers also tend to use more memory when more is available, so a reading from a machine with plenty of spare RAM is a ceiling rather than a minimum. The pattern is still clear: the 8GB plans that were fine before Enhanced are no longer enough for most groups, and hosts that document Enhanced now start their recommendations at 12 to 16GB.
How much RAM to plan for
These figures are a planning range drawn from those reports and from how hosts now size their Enhanced plans. Your own world will sit somewhere inside them depending on how much is built and how much is loaded.
| Your server | RAM to plan for | What pushes it higher |
|---|---|---|
| Up to about 10 players, no mods | 12GB as the floor, 16GB for comfort | Both regions loaded, big bases, lots of thralls |
| 10 to 30 players, light mods | 16GB | Mods that add maps or many placeables |
| 30 to 40+ players, heavy mods or large bases | 24GB or more | Purges, crowded PvP evenings, long-running worlds |
Watch the memory graph in your panel during your busiest evening rather than right after a restart. A server that creeps towards its limit and then restarts on its own is almost always out of memory, and the fix is either more RAM or less loaded content, not a faster CPU.
What actually uses the memory
- Regions. Enhanced loads both the Exiled Lands and the Isle of Siptah by default. Disabling a region stops the server loading its sublevels, which can lower RAM use. If your group never goes to Siptah, add this to
Engine.iniwith the server stopped:[Regions]thenExcludedRegions=IsleOfSiptah. The region may still be visible, but it will not work. - Mods. Every mod in
modlist.txtis loaded into memory, whether players use it or not. Map mods and large content packs cost the most. Patch 2.2.0 also forced every mod to be rebuilt, so check your list is up to date after big patches. - Buildings and placeables. Every foundation, wall and chest is world state the server keeps live. Long-running servers with sprawling bases grow steadily heavier.
- Thralls, pets and NPCs. Each one is simulated. Living Settlements, on by default, makes thralls go about their needs; one owner found switching it off saved only about 500MB, so it is not a big lever on its own.
Our guide to installing mods on a Conan Exiles server covers the mod list and load order, and the dedicated server setup guide shows where Engine.ini and ServerSettings.ini live.
CPU: why clock speed beats core count
A Conan Exiles server creates dozens of threads, but most of the game’s work runs on one of them. One owner sampled a clean Enhanced server on a 20-thread Intel i9-10900KF with 128GB of RAM while NPCs fought around him. The main thread used 84.22% of one logical core, the next 21.35% and the third 8.28%, while the whole machine sat at just 5.74% CPU.
That is why a server can lag with most of its CPU idle. When the main thread falls behind, players feel rubber-banding, delayed hits and thralls sliding around, and adding cores does nothing for it. What helps is a modern processor with high single-core speed, and a host that does not crowd too many busy servers onto the same cores.
Patch 2.2.0, released on 15 September 2026, made the biggest difference so far. It moved the game to Unreal Engine 5.8.2 and switched on Iris, Epic’s newer networking system, which sends updates only when something changes instead of reprocessing every replicated object for every player. Funcom said that before Iris a full server took eight times longer to do the same work as a quiet one, and that servers have seen roughly half the lag since. If you are running an older build, updating is the first performance fix, before any upgrade.
Settings that lower the load before you upgrade
These live in ServerSettings.ini or the admin panel. Change them with the server stopped if you edit the file, because the server writes its own values back when it shuts down.
BuildingReplicationDistance: keep it on Normal, the default. Far and Cinematic stream buildings to players from much further away and are meant for single player or screenshots.UseMinionPopulationLimit: off by default. Turning it on caps thralls and pets per clan, by default at 50 for a clan of one, plus 5 for each player in the clan, and cleans up the excess every 60 minutes.AmbientLifeEnabled(Living Settlements): on by default. Switching it off saves a little memory and CPU, but players lose thralls going about their lives.NPCRespawnMultiplierand corpse lifetimes: fewer NPCs alive and fewer bodies lying around mean less for the main thread to simulate.- Building decay: leaving decay on lets abandoned bases disappear over time, which keeps a long-running world from growing without limit.
Lag or crashes: what is the server short of?
Before you change plan, work out which resource is actually running out. The wrong upgrade costs money and changes nothing.
Storage, operating system and network
Funcom’s original manual asked for 35GB of disk. Give an Enhanced server more room than that for updates, mods and your own backups of game_0.db, the save file Enhanced uses. An SSD makes start-ups, shutdowns and saves faster, although it will not fix main-thread lag. The dedicated server runs on 64-bit Windows, and Enhanced added a native Linux server too, so a Linux host or VPS is now a straightforward option.
For the network, distance matters more than bandwidth. A UK group should look for a server in London or nearby in Europe. If you are moving an existing world onto a bigger plan, our guide to backing up and restoring a Conan Exiles save covers moving game_0.db safely.
Compare UK Conan Exiles hosts by RAM, CPU and location, and see which give you enough memory for the UE5 server.
Compare the best Conan Exiles server hostsConan Exiles server requirements FAQ
How much RAM does a Conan Exiles Enhanced server need?
Plan 12GB as the floor for a small vanilla group and 16GB for most servers. Groups of 30 to 40 players, heavy mod lists or very large bases should allow 24GB or more. The old 8GB figure comes from the UE4 server and is too low for Enhanced.
Is 8GB enough for a Conan Exiles server?
Not for Enhanced. Owners whose 8GB servers ran fine before the UE5 update reported out-of-memory crashes afterwards, even with around five players. 8GB only suits a server staying on the Legacy UE4 branch.
Does a Conan Exiles server use multiple CPU cores?
It creates many threads, but one main thread does most of the work, so single-core speed matters far more than the number of cores. A server can lag while the machine as a whole is mostly idle.
Does disabling the Isle of Siptah save RAM?
Yes. Adding ExcludedRegions=IsleOfSiptah under [Regions] in Engine.ini stops the server loading that region’s sublevels, which can lower memory use. The region stays visible but does not work.
Do mods change Conan Exiles server requirements?
Yes. Every mod in the list is loaded into memory, and map mods or large content packs add the most. Leave extra headroom for a modded server and remove mods your players no longer use.
More Conan Exiles server help
Compare hosts, set up the server and keep your world safe.
Conan Exiles patches and host panels change. Where your server or your host’s panel shows something different from this guide, follow what you see on your server.
