How to Change Map on a DayZ Server
Moving your DayZ server from Chernarus to Livonia, Sakhal, Nasdara or a community map such as Namalsk takes one line in a config file. Doing it cleanly takes a little more: knowing where your old world goes, which edits and mods stay behind, and how to check the new map before your players load into it.
DayZ does not load “Livonia” or “Nasdara” directly. It loads a mission folder named like <MissionName>.<TerrainName>, and that mission points the server at the terrain.
Switching from Chernarus to another mission leaves the old storage_1 in place. Switch back and that world loads as you left it, unless you wipe it.
Economy files, spawn points, temperatures, seasons and coordinate-based mods live inside each mission folder. A new map starts with its own defaults unless you port changes carefully.
A map mod needs its mod folder, its key, the correct -mod= entry, and the author’s mission. Miss one part and players either fail to join or the server stops at startup.
How DayZ decides which map loads
DayZ picks a map by loading a mission folder from mpmissions. In serverDZ.cfg, that is the template line inside class Missions. The format matters: it is not a friendly map name, but an exact mission folder name in the form <MissionName>.<TerrainName>. If the name does not match a real folder, startup stops with a mission error instead of falling back cleanly.
On self-hosted Windows setups, your start line may also carry a -mission= launch parameter, which also defines the mission the server uses. Make it point at the same folder as the template line. When the two disagree you get the classic “I changed the map but it still boots Chernarus” problem. On rented servers, many panels rewrite serverDZ.cfg at every start, so a hand edit can be discarded; in that case, use the panel’s map or mission field rather than fighting the rewrite.
class Missions
{
class DayZ
{
template = "dayzOffline.chernarusplus";
};
}; Bohemia’s mission files also include event missions such as halloweenOffline.chernarusplus and ChristmasOffline.Enoch. They follow the same naming rule but are seasonal variants on the same terrains, not other maps, so do not pick one by accident when you scroll through mpmissions.
The chain below is the whole system in two lines. Every map problem in this guide is one broken link in it.
template = “dayzOffline.sakhal”
mpmissions/dayzOffline.sakhal
from DayZ Frostline
template = “regular.namalsk”
the map’s author
plus sumrak.bikey in keys
Official DayZ maps at a glance
Each official map has its own mission folder, and each folder carries its own lighting and season defaults. That is the first sign that a map switch changes more than the terrain. Sakhal and Nasdara come from paid expansions, so tell your community first and check that your players own the relevant expansion before you move the whole server over.
| Map | Mission folder | Size | Comes from | lightingConfig in cfggameplay.json | init.c season start |
|---|---|---|---|---|---|
| Chernarus | dayzOffline.chernarusplus | 230 km² | Base game | 0 | 20 September |
| Livonia | dayzOffline.enoch | 168 km² | Base game | 0 | 17 July |
| Sakhal | dayzOffline.sakhal | 83 km² | Frostline | 2 | 1 February |
| Nasdara | dayzOffline.nasdara | 267 km² | Badlands | 3 | 30 April |
Nasdara is the largest map Bohemia has made for DayZ, and it arrived with Update 1.30. Bohemia announced Update 1.30 as “a fresh start for everyone, with a full wipe across all platforms”, so if your community has only just rebuilt after 1.30, a map change is a second fresh start for them. Plan it, announce it and give people a date.
Size matters for more than travel time. A bigger map spreads players thinner, gives the economy more places to fill and gives the server more world to keep track of. The bars put the four official maps side by side.
Before you switch: what happens to your current world
By default, each mission keeps its own persistence folder using instanceId = 1, which means a storage_1 inside that mission folder. So if you switch from dayzOffline.chernarusplus to dayzOffline.enoch, Chernarus does not normally get deleted. Its world is simply not loaded while Livonia is active. Switch back later, and the parked Chernarus world comes back.
What does not come with you is just as important: characters, gear, bases, stashes, vehicles and map-placed persistence stay with the old mission. That is why switches confuse players. To them it looks like everything vanished; to the server, they are simply in a different mission with its own, empty save.
Back up before you change anything. Stop the server gracefully first: Bohemia recommends a graceful shutdown to avoid side effects on player characters and on the save being written. Then copy the whole mission folder, including storage_1, not just one XML file. If you want a clean routine for that, keep it alongside your normal game server backups.
Decide up front which of these three jobs you are doing:
- Replace: one server, one active map, old world parked.
- Rotate: one server that sometimes switches back and forth, keeping separate worlds per mission.
- Run two maps at once: this needs two servers, because one DayZ server loads one mission at startup. Give the second one its own
instanceIdor its own install so the saves never overlap.
Here is what travels with you and what stays behind when the server boots into a different mission.
| Part of your server | Comes to the new map | Stays with the old map |
|---|---|---|
| Characters and their gear | No | Yes |
| Bases, stashes and vehicles | No | Yes |
| Loot edits in types.xml, events.xml, globals.xml | No | Yes |
| Season in init.c and cfggameplay.json tweaks | No | Yes |
| serverDZ.cfg: name, password, slots | Yes | No |
| Mods that do not depend on the map | Yes | No |
| Mods with map positions (traders, custom spawns) | Partly | Yes |
Switch to another official map
- Update the server first. If the server files do not include the mission you want, no config change will fix it. This is especially relevant after new content drops such as Nasdara being added.
- Confirm the target mission folder exists under
mpmissions. For official maps that means checking for the exact folder name you intend to load, such asdayzOffline.enoch,dayzOffline.sakhalordayzOffline.nasdara. - Stop the server gracefully and back up the current mission folder. That protects the active
storage_1plus all economy and config changes in one go. - Edit the mission selection exactly. Change the
templatevalue to the new mission name. If your host panel manages this field, change it there instead of editing the file directly. - Check
-mission=if you use it. It should agree with the mission you just selected. If it points to a different mission path, the server can keep loading the old mission or fail at startup. - Set lighting only if you are not using
cfggameplay.json. Sakhal useslightingConfig = 2. IfenableCfgGameplayFileis enabled, the value incfggameplay.jsontakes priority, so changing onlyserverDZ.cfgmay appear to do nothing. - Start the server and watch the console. You want to see the mission load cleanly and no missing-folder or syntax errors.
- Join the server and confirm the terrain, spawns and loot. Do this before opening the server to everyone else.
class Missions
{
class DayZ
{
template = "dayzOffline.nasdara";
};
}; Why this order matters: the template line decides which world loads, but the mission folder behind it also decides the economy, weather, season and where the save is written. Checking in this order means that if something is wrong, you find out from the console or your own test join, not from twenty players in Discord.
Switch to a community map
A community map adds one more layer: the terrain itself is usually a mod. So the server needs the mod folder in the server root, the matching key in the server’s keys folder because verifySignatures = 2, the map listed in -mod= so clients are told what to load, and the author’s mission folder copied into mpmissions. Miss any one of those and the result is either a startup failure or players being kicked on join. If you want the broad rules laid out separately, this is the same logic behind installing DayZ server mods.
The pattern is the same for every community map:
- Upload the map mod
@folder to the server root. - Copy the map’s
.bikeyinto the serverkeysfolder. - Add the map to
-mod=. - Copy the map author’s mission folder into
mpmissions. - Set
templateto that exact mission folder name.
Download the map to the server with SteamCMD rather than through your Steam client. Subscribing in Steam only downloads the mod to your own PC.
workshop_download_item 221100 <WorkshopID>
Namalsk worked example
Namalsk needs up-to-date @Namalsk Island and @Namalsk Survival in the server root, plus sumrak.bikey copied to the server keys folder. The usual mission choices are regular.namalsk and hardcore.namalsk.
| Mission | Vehicles | Base building | Loot and lifetimes | Temperature setup |
|---|---|---|---|---|
regular.namalsk | Basic vehicles | All base building | Faster lifetimes, more food and weapons | November temperatures |
hardcore.namalsk | No vehicles | No base building except stashes and small tents | Longer lifetimes, fewer weapons | December temperatures |
Namalsk also has its own lighting values: 222 for dark and 223 for bright. As with official missions, if cfgGameplay.json is in use then set it there because that takes priority. The author recommends a maximum of 30 to 40 players, so if you run a 60-slot Chernarus server today, lower the slot count for Namalsk rather than carrying it over.
The two folder names contain spaces, so wrap the whole parameter in quotes on a Windows start line:
"-mod=@Namalsk Island;@Namalsk Survival"
class Missions
{
class DayZ
{
template = "regular.namalsk";
};
}; If you want only Namalsk Island without the Survival pack, use a suitable mission and remove the include of types_dzn.xml from cfgeconomycore.xml. Read the author’s rules before you switch a paid community over: you cannot monetise a server running Namalsk Island or Namalsk Survival, and that includes selling priority queue slots. Donations are fine as long as nothing is given in return.
Why your loot, weather and settings do not follow you
Economy files live inside each mission folder. That includes types.xml, events.xml, globals.xml, cfgplayerspawnpoints.xml, cfggameplay.json, cfgweather.xml, init.c and more. When you change mission, the server reads the new mission’s files, not the old ones. That is why a map switch can look like a full reset even though the old world still exists untouched.
Do not paste a whole types.xml from one map into another. The reason is not just “it might break”; the loot economy expects the item categories and flags that belong to that mission. Namalsk is the clearest example because it uses categories, tags and value flags rather than usage flags. A wholesale paste gives the server an economy definition that does not fit the target map, and the visible result is missing or badly distributed loot.
The safe method is slower but reliable: start from the new map’s own files, copy across only the entries you deliberately changed, one at a time, and check a few loot spots after each batch. It costs you an evening of admin time, not server performance, and it keeps the new economy intact.
The same warning applies to map-specific atmosphere. init.c sets a season window per map, and cfggameplay.json has temperature arrays that differ sharply between maps. Copying Chernarus or Livonia settings onto Sakhal or Nasdara can give you the wrong season, wrong temperatures and wrong lighting. Coordinate-based mods are even stricter: trader positions, custom spawns and placed objects point at locations on the old terrain, so on the new map they can end up in the sea, underground or nowhere useful.
Mod dependencies and version matching after a map change
After any game update, update every mod, map mods included, before you assume your switch failed. A map mod that has not been updated for the current game version can stop the server or kick players on join even when the mission name is spelled perfectly.
forceSameBuild = 1 only lets in clients on the same game build as the server. That keeps out half-updated players who would otherwise hit confusing errors, but it also means a server that has not updated after a patch turns everyone away.
Use -mod= for map mods and other client-required mods, because those are broadcast to clients. -serverMod= is only for server-side mods that clients do not need. A map always belongs in -mod=: every player has to load the terrain, and -serverMod= is not broadcast to clients.
First-boot checks so players do not load into a broken world
Treat the first start after a map change as a private check, not a public launch. Lock the server with a password for ten minutes if you have to. It is far easier to fix a wrong mission or an empty loot table before anyone has spawned in and started building.
- Watch startup output. Confirm the intended mission is loading and there is no missing-folder, quote or semicolon error.
- Join with the same mod set a normal player uses. This checks more than server boot; it checks client dependency broadcast, signatures and version matching.
- Confirm the terrain immediately. Make sure you are actually on Livonia, Sakhal, Nasdara or the community map you selected, not the old terrain still being launched from a panel override or
-mission=path. - Check a few loot locations. You are looking for normal item presence, not perfect balance. If everything is empty or obviously wrong, stop and inspect the target mission’s economy files before opening up.
- Check spawn points. Wrong or inherited spawn-point files show up fast as players appearing in the sea, in blocked areas or nowhere intended.
- Do one restart and re-check persistence. The point is to confirm the new mission is writing to its own
storage_1. If you use-storage=, look in that custom root rather than the mission folder.
If the first start is not clean, follow the questions in order. Each one points at the first thing to check.
Rotate maps, switch back, or wipe only one map
Rotating maps is mostly a matter of switching the mission selection back to the earlier folder. Because each mission keeps separate persistence, changing back from Livonia to Chernarus normally restores the parked Chernarus world exactly as it was. That makes map rotation workable on one server, as long as your community knows that each map has its own separate progress.
If you want to wipe only one map, stop the server and delete that map mission’s storage_1, then start again. Do not delete another mission folder by mistake, and do not wipe while the server is still running, because that is how you turn a planned reset into inconsistent persistence.
storageAutoFix = 1 can replace corrupted persistence files with empty ones, which is useful for recovery from corruption, but it is not a substitute for backups and it is not a controlled wipe tool. An empty replacement means that part of the save is gone. Whether you are wiping or rotating, tell players in advance which map is live and whether their progress is parked or reset, because from the inside the two look exactly the same.
Does a bigger map need a bigger server?
Often, yes. A DayZ server loads the map, its economy and the saved world before anyone joins, so a bigger map starts with a higher memory bill, and a community map adds its own mod data on top. Our guide on how much RAM a DayZ server needs is the right companion here, especially if you are moving up to Nasdara or stacking a community map with several other mods.
The practical question is not just map size. It is the combination of map, mod count, persistence load and how much headroom you want after restarts and busy periods. If you are already close to the edge, a map swap is a good time to review both memory headroom and your general approach to optimising DayZ server performance.
| Situation | Stay on current plan | Consider an upgrade |
|---|---|---|
| Switching between official base-game maps with a light mod list | If current restarts are clean and performance is stable | If you already see memory pressure or long recovery after restart |
| Moving to Sakhal or Nasdara | If you have clear headroom and no existing instability | If your current plan is merely coping; bigger maps raise the baseline |
| Moving to a community map with extra dependencies | If the mod set stays lean and persistence remains healthy | If you are adding multiple client-required mods alongside the map |
| Running a second map at the same time | Not possible on one server | Use a second server, with resources sized for a full second instance |
If your plan is already close to its memory limit, or your panel makes mission and mod changes awkward, compare DayZ hosts on RAM, mod support and how easily they let you switch missions.
Compare the best DayZ server hostsCommon DayZ map switch problems
| Symptom | Likely cause | First fix |
|---|---|---|
| Server still loads Chernarus | Edit not saved, wrong config file, panel rewrote serverDZ.cfg, or -mission= points elsewhere | Check the active config and panel map field, then make template and -mission= agree |
| Server stops at start with a mission error | Mission folder typo, capitalisation issue, missing quotes or missing semicolon | Match the folder name exactly and recheck the line syntax |
| Players are kicked on join with mod, version or signature messages | Version mismatch, missing mod, stale mod, missing key, or client lacks the map mod | Update server and mods, confirm .bikey placement, and verify the map is in -mod= |
| Players spawn in the sea or the wrong place | Spawn-point file or coordinate-based mod carried over from the old map | Restore the target map’s own spawn configuration and review custom coordinate mods |
| Loot is missing or obviously wrong | A whole types.xml or related economy file was copied across maps | Revert to the target mission’s defaults and port changes one entry at a time |
| Night is far too dark or too bright | lightingConfig mismatch or cfggameplay.json overriding serverDZ.cfg | Set the value in the place that actually has priority for that mission |
| Old bases are gone | You are on a different mission’s persistence, or that mission was wiped | Switch back to the original mission folder or confirm whether storage_1 was deleted |
| Namalsk items are missing | @Namalsk Survival is missing, or the types_dzn include is wrong for your setup | Check the Survival pack, mission choice and cfgeconomycore.xml include state |
DayZ map change server FAQ
How do I change the map on my DayZ server?
Stop the server, back up the current mission folder and set the template line in serverDZ.cfg to the mission folder of the new map, for example dayzOffline.enoch for Livonia. If your host panel has a map or mission field, use that instead, because the panel rewrites the file on start. Then start the server and check the console before letting players in.
Will changing map wipe my DayZ server?
No. Each mission keeps its save in its own storage_1 folder, so the old world is parked and comes back when you switch back. The new map starts empty, though: characters, bases, vehicles and stashes do not carry over.
Do players need the DLC to play Sakhal or Nasdara on my server?
Sakhal comes with DayZ Frostline and Nasdara comes with DayZ Badlands, and both are paid expansions. The mission files ship with the server, but you should tell your community before switching and make sure players have the expansion for that map.
Can I run two DayZ maps on one server?
Not at the same time. A DayZ server loads one mission at startup, so two active maps at once means two servers. You can still rotate maps on one server by switching missions between restarts, with separate persistence kept per mission.
What is the mission name for Nasdara (Badlands)?
The official mission folder name is dayzOffline.nasdara. Use that exact name in the template line, and make any -mission= path or panel mission setting point to the same mission.
More DayZ server help
The host comparison, plus our guides to RAM, mods, performance and console hosting.
Mission names and file layouts checked against Bohemia’s server configuration documentation and official mission files, and the Namalsk server files, in November 2026. Game updates can add missions or change files, and host panels label the map setting differently, so follow your host’s current panel where it differs.